Perancangan Quadband BPF dengan Komponen Lumpeduntuk Sistem m-BWA

Authors

  • Gunawan Wibisono Departemen Teknik Elektro, Fakultas Teknik Universitas Indonesia
  • Daniel Simanjuntak Departemen Teknik Elektro, Fakultas Teknik Universitas Indonesia
  • Taufiq Alif Kurniawan Departemen Teknik Elektro, Fakultas Teknik Universitas Indonesia

DOI:

https://doi.org/10.14203/jet.v13.47-54

Keywords:

quadband BPF, m-BWA, komponen lumped, insertion loss, return loss, VSWR, group delay

Abstract

Ada banyak teknologi mobile broadband wireless access (m-BWA) yang saat ini digunakan, agar bisa mencakup seluruh teknologi m-BWA yang ada dalam sebuah perangkat maka diperlukan teknologi multiband . Salah satu komponen penting yang mendukung perkembangan teknologi m-BWA adalah bandpass filter (BPF), yang berfungsi untuk memilah-milah dan mengisolasi band yang spesifik dari interferensi pada transceiver radio frequency (RF). Pada penelitian ini akan dirancang quadband BPF yang beroperasi pada frekuensi tengah 950 MHz dan 1,85 GHz untuk aplikasi GSM, 2,35 GHz untuk aplikasi WiMAX, dan 2,65 GHz untuk aplikasi LTE secara simultan. Rangkaian quadband BPF dibangun dan dikembangkan dari konsep dualband BPF dengan menambahkan sejumlah cross coupling pada inductive coupling BPF tersebut untuk menghasilkan zero pada frekuensi tertentu yang diharapkan menggunakan komponen lumped. BPF yang dirancang memiliki spesifikasi, input return loss (S11) < -10 dB, insertion loss (S21) > -3 dB, dan voltage standing wave ratio (VSWR) antara 1 – 2, dan group delay kurang dari 10 ns. Perancangan dilakukan menggunakan perangkat lunak Advance Design System (ADS) dan kemudian difabrikasi berbasis printed circuit board (PCB). Hasil simulasi BPF menunjukkan kinerja quadband BPF memenuhi kriteria perancangan sedangkan hasil fabrikasi mengalami pergeseran.

Downloads

Download data is not yet available.

References

H. Joshi, “Multiband RF Bandpass Filter Design”, Dissertation, Purdue University, Indiana, Mei, 2010.

Y. X. Guo, L.C. Ong, M. Y. W. Chia, dan B. Luo, “Dual-band bandpass filter in LTCC”, Microwave Symposium Digest, 2005 IEEE MTT-S International, 2005, pp. 2219 - 2222.

M. Steer, Microwave and RF Design : A Systems Approach, North Carolina, USA: SciTech Publishing, Inc., 2010.

A. B. Fathoni, “Rancang Bangun Multiband dengan Folded Dual Cross Open Stub”, Thesis, Universitas Indonesia, Depok, Indonesia, 2012.

H. Xie, L. He, P. Shen, J. Gan, L. Li, Y. Huang, L. Huang, and W. Zhang, “A novel dual-band power amplifier for wireless communication”, IEEE 2009 International Conference on Communication Software and Networks, 2009, pp. 332 – 335.

C. W Sayre, Complete Wireless Design, 2nd ed., New York, USA: The McGraw-Hill Companies Inc., 2008.

I. Bahl, Lumped Elements for RF and Microwave Circuits, Boston, USA: Artech House, 2003.

D. M. Pozar, Microwave Engineering Third Edition, New Jersey, USA: John Wiley & Son, Inc., 2005

R. J. Wenzel, “Understanding transmission zero movement in cross-coupled filters”. Microwave Symposium Digest, 2003 IEEE MTT-S International, 2003, pp. 1459 – 1462.

C. W. Tang, Y. C. Lin, and C. Y. Chen, “Realization of transmission zeros in combine filters using an auxiliary inductively coupled ground plane”, IEEE Transactions on Microwave Theory and Techniques, vol. 51, pp. 2112 – 2118, October 2003.

F. G. S. Silva, R. N. de Lima, and R. C. S. Freire, “A design methodology for concurrent impedance matching networks based on multiresonant circuits”, New Circuits and Systems Conference (NEWCAS), 2011 IEEE 9th International, Jun 22-29, 2011, pp. 386 – 389.

Downloads

Published

2016-06-29

Issue

Vol. 13 No. 2 (2013)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

The copyright to this article is transferred to BRIN if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to BRIN. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The copyright transfer form can be downloaded here.

The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

How to Cite

[1]
“Perancangan Quadband BPF dengan Komponen Lumpeduntuk Sistem m-BWA”, J. Elektron. dan Telekomun., vol. 13, no. 2, pp. 47–54, Jun. 2016, doi: 10.14203/jet.v13.47-54.