Desain dan Realisasi Filter Bandpass Mikrostrip Dengan Struktur Hairpin
DOI:
https://doi.org/10.14203/jet.v13.33-37Keywords:
filter bandpass, hairpin, mikrostripAbstract
Kebutuhan akan sebuah filter dalam sebuah rangkaian elektronik mutlak diperlukan, dikarenakan sesuai dengan fungsi filter adalah meloloskan frekuensi yang diinginkan dan akan menahan frekuensi yang tidak diinginkan. Desain dan realisasi filter bandpass menggunakan teknologi mikrostrip dengan struktur hairpin akan dipaparkan pada makalah ini. Strukur hairpin merupakan perbaikan dari filter yang menggunakan parallel coupled bila ditinjau dari sisi dimensi sebuah filter, di mana pada struktur hairpin ini, panjang dari stripline akan dilipat membentuk huruf U sebesar ½ λ dengan sudut lekukan 90o. Filter bandpass struktur hairpin dengan teknologi mikrostrip akan didesain dengan insertion loss ≤ -3 dB pada daerah passband, return loss ≥ -20 dB, lebar bandwidth 200 MHz, impedansi karakteristik 50 Ω, frekuensi kerja 2,9–3,1 GHz dengan respon filter Chebyshev 0,1 dB. Filter bandpass yang didesain menggunakan bahan dari roger RO4350 yang mempunyai ketebalan 1,44 mm, dan permitivitas relatif (εr) = 3,77. Filter bandpass struktur hairpin ini dirancang dan disimulasikan dengan menggunakan perangkat lunak ADS (Advanced Design System) dari Agilent.Downloads
References
D. M. Pozar, Microwave Engineering, John Wiley & Sons inc, 1998.
J. S. Hong, Microstrip Filters for RF/Microwave Applicatios, John Wiley & Sons, 2011.
H. Madan, Design Of Microstrip Bandpass Filters, College of Engineering, Pune, 2007.
K.Vidhya and T.Jayanthy "design of microstrip hairpin band pass filter using defected ground structure and open stubs" in Proc. International Conference on Information and Electronics Engineering, IPCSIT, vol. 6 (2011), 268 – 272.
S. Seghier, N. Benabdallah, N. Benahmed, F. T Bendimerad and K. Aliane,“Design and Optimization of Parallel Coupled Microstrip Bandpass Filter for FM Wireless Applications”, The Computing Science and Technology International Journal, vol. 2, no. 1, march, 2012.
N. Toledo, “Practical Techniques for designingMicrostrip tapped hairpin resonator filters on FR4 laminate”, in 2nd National ECE Conference, Manila, Philippines, November 2001.
S.Y. Lee and C.M.Tsai, "New cross-coupled filter design using improved hairpin resonators", IEEE Transactions on Microwave Theory and Techniques, vol. 48, no. 12, pp. 2482 – 2490, Dec. 2000.
G.L. Matthaei“Narrow-Band, Fixed-Tuned, and Tunable Bandpass Filters With Zig–Zag Hairpin–Comb Resonators”, IEEE Transactions on Microwave
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
The copyright to this article is transferred to BRIN if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to BRIN. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment. The copyright transfer form can be downloaded here.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
